|
Title: Cant get Galletto 1260 to work Post by: Leaveittobeav98 on April 11, 2021, 11:59:50 PM Cant get Galletto 1260 to work. Recently got new laptop with windows 10 64bit and cant get my galletto 1260 to work and need to immo 0ff my 8E0 909 518 AF ecu and adapt new cluster as my fuel level sensor shorted my old cluster and have read that ftdi was making drivers brick cables. ordered a new kkl Chinese clown should be here tomorrow appreciate any info/help also my old ecu has a stage 2 euro custums tune. hopefully its not gone as i just spent a decent amount for the flash. you can message my email (leaveittobeav98@gmail.com)
Title: Re: Cant get Galletto 1260 to work Post by: stuydub on April 12, 2021, 03:13:53 AM http://nefariousmotorsports.com/forum/index.php?topic=3088.0
Title: Re: Cant get Galletto 1260 to work Post by: Auriaka on April 12, 2021, 09:32:13 AM I have never got galeto 1260 to work with eeprom jobs.... Works for bins...
For eeprom FTDI drivers and the ft232 cable works fine. Ecu DOES have to be in bootmode though even with the FT232 to do the eeprom using the cmd eeprom tool in me7logger Title: Re: Cant get Galletto 1260 to work Post by: dal on April 12, 2021, 11:19:37 AM Are you guys putting the ECU in bootmode?
Title: Re: Cant get Galletto 1260 to work Post by: R32Dude on April 14, 2021, 05:28:57 PM Cheap Galletto on win7 32 bit works fine for flashing maps in boot mode but not for EEprom where immo off is normally done. There are other methods for that.
|