|
Title: EDC 15 MapPack Post by: JaDa on September 26, 2021, 11:49:52 AM Working with my first map package for EDC 15. A lot to learn and takes some time but finds it very fun. But sometimes I manage to change the view on the map so that I do not understand or find anything again. I reckon I press a button wrong or one too many. Can anyone explain to me the sea that makes my map look like this and what needs to be done to change this?
(https://i.postimg.cc/7htBYDT2/MapPack.png) I was looking for my Axis data for a SOI map and can not now find my my Axis data when it looks like this. Yes, im quite sure there will be more questions before im finish. ??? Title: Re: EDC 15 MapPack Post by: ZpiXDK on September 28, 2021, 03:16:54 AM Just use EDC Suite for EDC15
Freeware and has all you need for a simple stage 1 But to answer your question, you might have pressed m, just press w to make it smaller Title: Re: EDC 15 MapPack Post by: JaDa on October 02, 2021, 11:58:24 AM Hi there,
Thanks for your reply. I can see by the picture that it was not easy to understand wath i meant but i sorted it out now. It was not the Zoom with "W". I will take a bette picture if this happen again. I use EDC Suite, but are easy my way in on winols with this. Way simpler road when you can use EDC as support an backup. Thanks! ;D Title: Re: EDC 15 MapPack Post by: ZpiXDK on October 09, 2021, 05:30:09 AM So you are just missing axis data in Winols?
SOI maps will not add axis data, because they are not in front of the map, you need to add it manuel You can copy the address from EDCSuite if you can't find it (Pretty sure that EDCsuite has a fault were it set X as Y and Y as X, or it's the factor thats swaped, can't remember, in EDCsuite the map is shown correct, but if you copy it to winols you need to swap it) Just find some tutorials on youtube |