|
Title: ME 7.5 1024kb no vin/no immoid 06A906032HL Post by: NT1911 on January 22, 2022, 12:41:22 PM Hi guys my first read maybe doesnt work. idk.
i use mpps and 95040 (i will disable only the immo and change later the VIN to my car VIN. I cant see a "login" code like in the posts here in the forum.. maybee well its a 1024kb flash file and not a 512kb flash ?) can anyone check this file ? i want only a stock - AUM - Manuel gear - NO IMMO in MPPS i can see -> check ID -> Bosch Hardware Number: 0261207438 Bosch Software Number: 1037360644 Vw Software Number: 06A906032HL 0001 System Type Number: 1.8L R4/5VT G Flash Program Attempts: 0 Flash Program Counter: 0 ECU Running in Normal Mode P0171: System Too Lean Bank 1 P0118: Enginge Coolant Temperature Circuit High P0562: System Voltage Low P0600: Serial Communication Link And al lot more -> no power no communication. i have readed the ecu in this settings: Speed Options - Medium(Default) Data Options - Data Only(Default) When i will check over this 95040tool the file cant read or is damaged ? idk.. Any help? Sry for my horrible english.. Title: Re: ME 7.5 1024kb no vin/no immoid 06A906032HL Post by: macxxx on January 22, 2022, 01:39:21 PM it's not an eeprom read , you uploaded a Flash file from ecu
Title: Re: ME 7.5 1024kb no vin/no immoid 06A906032HL Post by: NT1911 on January 23, 2022, 04:31:02 AM it's not an eeprom read , you uploaded a Flash file from ecu Is it not the same ? i want to check the vin and immo which files needded i for this ? the ecu ? ??? Title: Re: ME 7.5 1024kb no vin/no immoid 06A906032HL Post by: macxxx on January 23, 2022, 05:52:06 AM Flash contains maps etc it's not the same
Use 95040 epprom tool and read epprom Title: Re: ME 7.5 1024kb no vin/no immoid 06A906032HL Post by: NT1911 on January 23, 2022, 06:11:18 AM Flash contains maps etc it's not the same Use 95040 epprom tool and read epprom Ahh okay! Works this epprom tool with the mpps cable to ? or only "with a dump kkl" cable ? Title: Re: ME 7.5 1024kb no vin/no immoid 06A906032HL Post by: NT1911 on January 23, 2022, 06:43:22 AM Ahh okay! Works this epprom tool with the mpps cable to ? or only "with a dump kkl" cable ? okay idont know why but my kkl cable works.. xD Last times this cable wont work driver problems and and and.. but now i have a 1 KB rom file ? ist it right ? Ok, just to clarify for me: The data status of 1024 Kbytes is only for performance? and the small one with 1 Kbytes is only for the immo ? Is it possible to read out the login of the control unit now? Or: Can I now change the VIN to any other vehicle as I wish / Or rather change it to my VIN. Title: Re: ME 7.5 1024kb no vin/no immoid 06A906032HL Post by: macxxx on January 23, 2022, 02:09:05 PM Login code is 02190 , just use a normal immo3 adaptation procedure using VCDS ( login to ecu using this code , then channel 50 of adaptation and you put login from your cluster/old ecu )
|