NefMoto

ECU Files => Checksum Update Requests => Topic started by: turbocrack on March 10, 2022, 02:26:59 PM



Title: Audi A4 B5 1.8T AEB Motronic 3.8.2 8D0907557T 8D0907558E live Tuning Roadrunner
Post by: turbocrack on March 10, 2022, 02:26:59 PM
Hello
i wanted to ask if anyone has a checksum plugin for Motronic 3.8 for live tuning with Tunerpro and Roadrunner Emulator or can tell me where i can disable the checksum routine in one of the two files?





Title: Re: Audi A4 B5 1.8T AEB Motronic 3.8.2 8D0907557T 8D0907558E live Tuning Roadrunner
Post by: prj on March 10, 2022, 03:10:51 PM
No need to do anything with checksum.

Did you already fit the emulator? Because that's the bigger problem in case of the roadrunner.


Title: Re: Audi A4 B5 1.8T AEB Motronic 3.8.2 8D0907557T 8D0907558E live Tuning Roadrunner
Post by: turbocrack on March 11, 2022, 02:10:33 PM
Hi Prj, thank you very much for your quick reply.  :) Ok, that means the Roadrunner automatically updates the checksum?

You mean because there is no PLCC adapter for it?
I don't have the Roadrunner yet but was planning to buy it.
Of course, I would prefer something like the ols 300 or an alternative that works with Winols 2.24


Title: Re: Audi A4 B5 1.8T AEB Motronic 3.8.2 8D0907557T 8D0907558E live Tuning Roadrunner
Post by: prj on March 11, 2022, 02:33:35 PM
The checksum on this ECU only throws a fault code, it does not prevent the ECU from running.
Hence no need to do anything about it.


Title: Re: Audi A4 B5 1.8T AEB Motronic 3.8.2 8D0907557T 8D0907558E live Tuning Roadrunner
Post by: turbocrack on March 12, 2022, 07:08:27 AM
OK, that sounds very good. I think that's the same with Motronic 3.8.3?

Do you happen to know when the Roadrunner will be back in stock at Moates?