|
Title: Help me identify this device installed instead of 29F800 flash Post by: blairl on June 14, 2022, 09:08:09 AM Anyone ever seen something like this before? I was helping a team at a 24h of Lemons race flash their car back to stock, two of their ECUs had these things inside them. Couldn't write to them. I was able to read the flash, which raised even more questions once I took a look at the file.
ECU reports it's an 06A 906 032 HS. Title: Re: Help me identify this device installed instead of 29F800 flash Post by: nyet on June 14, 2022, 09:52:46 PM That's not a flash, thats a riser that just looks like a flash to the ECU.
I think you vastly misunderstand what you are looking at. Title: Re: Help me identify this device installed instead of 29F800 flash Post by: d3irb on June 14, 2022, 10:38:03 PM This is an APR "EMCS 2." It's a fancy Flash emulator board built using an AMD flash chip and a Xilinx CPLD. You could program it at home using a goofy little tool that APR sold with it, that plugged into the ribbon connector you see on the board. I think it supported some kind of map switching. It's probably not worth figuring out in 2022, just get a normal flash chip and make a tune.
Title: Re: Help me identify this device installed instead of 29F800 flash Post by: blairl on June 21, 2022, 07:32:34 PM This is an APR "EMCS 2." It's a fancy Flash emulator board built using an AMD flash chip and a Xilinx CPLD. You could program it at home using a goofy little tool that APR sold with it, that plugged into the ribbon connector you see on the board. I think it supported some kind of map switching. It's probably not worth figuring out in 2022, just get a normal flash chip and make a tune. Thanks man, very cool info I’ll look into it. Looks like a neat piece of hardware. Sent from my iPhone using Tapatalk Title: Re: Help me identify this device installed instead of 29F800 flash Post by: nyet on June 21, 2022, 07:50:15 PM Thanks man, very cool info I’ll look into it. Looks like a neat piece of hardware. not sure "neat" is the adjective i'd use. Replace with a normal flash chip, done. Title: Re: Help me identify this device installed instead of 29F800 flash Post by: royce5950 on January 11, 2023, 05:26:08 AM I didnt have a look at the file, however if I remember correctly it should be scrambled APR tune.
Title: Re: Help me identify this device installed instead of 29F800 flash Post by: nyet on January 12, 2023, 07:32:24 PM There is nothing of any interest or use in this thread whatsoever.
|