Title: Can to PID address Post by: Fero on March 09, 2023, 03:26:53 PM Hi All
Im trying to create an RPI to monitor readings from my Audi A4 B7 using Torque Pro. I want to add some custom PIDs like Engine Oil Temp and Gear Box Fluid Temp which are not available in Torque Pro. I have tried sniffing the CAN Bus and read some data but was unable to understand or convert them. Does anyone have an idea or can point me in the right direction? Sorry if I posted in the wrong place. Title: Re: Can to PID address Post by: fknbrkn on March 09, 2023, 09:54:37 PM Hi All Im trying to create an RPI to monitor readings from my Audi A4 B7 using Torque Pro. I want to add some custom PIDs like Engine Oil Temp and Gear Box Fluid Temp which are not available in Torque Pro. I have tried sniffing the CAN Bus and read some data but was unable to understand or convert them. Does anyone have an idea or can point me in the right direction? Sorry if I posted in the wrong place. MED9 Funktionsrahmen, CAN section got all that you need Its better to sniff canbus for sure Title: Re: Can to PID address Post by: Fero on March 10, 2023, 02:07:35 AM MED9 Funktionsrahmen, CAN section got all that you need Thank you for the reply. Ill search there.Its better to sniff canbus for sure |