Title: Reading 2001 Audi TT 225Q AMU ECU Post by: Currancchs on February 21, 2013, 06:16:28 PM ECU is: 8N0 906 018T
Vehicle is a 2001 Audi TT 225 Quattro w/6 speed manual, stock ECU (tried to read spare APR stage II ECU on same car as well, but was unsuccesful) Figured I'd contribute, if only in a small way: Reading this ECU required me to use memory layout ME7 29F800BB and manually set the Baud rate to 10400 I originally tried to read using ME7 29F800 with the max baud rate available, didn't work and spit out some weird characters during connection. I then tried ME7 29F800BB and this spit out something like: THIS IS THE RAM during connection, but still failed to read (after clicking full read flash), got stuck at negotiating communications... When I set the Baud rate lower it worked. Hope this helps somebody! Title: Re: Reading 2001 Audi TT 225Q AMU ECU Post by: k0mpresd on February 21, 2013, 06:22:58 PM that is probably a 512kb file too btw. not 1mb like you have read.
Title: Re: Reading 2001 Audi TT 225Q AMU ECU Post by: ddillenger on February 21, 2013, 07:11:37 PM THIS-IS-THE-RAM comes up if you don't power down the ecu after a flashing/reading session.
|