|
Title: Won't Connect with rosstech cable Post by: southernduckie on March 10, 2014, 04:31:58 AM Hi I am trying to connect i have tried all the settings and either it wont recognise the cable or it comes back with these readouts not sure what is wrong it looks like it connects then drops out? it won't let me read anything?
Validated FTDI device is in dumb mode. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init succeeded. Switching to KWP1281 session. KWP1281 connect info: 8D0907557P 1.8L R4/5VT MOTR HS D04 Connecting to address 0x01. Slow init succeeded. KWP1281 connect info: 8D0907557P 1.8L R4/5VT MOTR HS D04 Connecting to address 0x11. Slow init failed. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init succeeded. KWP1281 connect info: 8D0907557P 1.8L R4/5VT MOTR HS D04 Connecting to address 0x01. Slow init succeeded. KWP1281 connect info: 8D0907557P 1.8L R4/5VT MOTR HS D04 Connecting to address 0x11. Slow init failed. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init succeeded. KWP1281 connect info: 8D0907557P 1.8L R4/5VT MOTR HS D04 Connecting to address 0x01. Slow init succeeded. KWP1281 connect info: 8D0907557P 1.8L R4/5VT MOTR HS D04 Connecting to address 0x11. Slow init failed. Disconnected Thanks for looking Cheers Andrew Title: Re: Won't Connect with rosstech cable Post by: stuklr on March 10, 2014, 04:58:55 AM What are you trying to do? Read or write?
The older me5.9.2 cars can't be read via obd, just flashed. Title: Re: Won't Connect with rosstech cable Post by: amerol0601 on June 01, 2014, 07:14:05 AM By settings you mean "Dumb Mode"?
Also, if what above is not applicable, you may also have to use downgraded drivers for your VCDS cable. At least thats what I had to do. |