|
Title: looking for 06A906032NL Post by: _nameless on March 17, 2014, 06:46:40 AM when I read the org from the car thew obd 2 there was an error... when I load the modded file it has error for programing incomplete. Remove the ecu and read and write is no problem, but I need a new file to start with because of the orig bad read.
Thanks Marty Title: Re: looking for 06A906032NL Post by: ddillenger on March 17, 2014, 09:55:43 AM One of the caveats of using nefmoto/clone MPPS on later mk4's.
Try this: Write the ecu. When it finishes, leave the key off for 30 seconds. Turn the key on. DO NOT start the car. Wait 30 seconds. Turn the key off, then back on and check for codes. If that doesn't work, the 032PL/LP software doesn't have this issue. Title: Re: looking for 06A906032NL Post by: fknbrkn on November 10, 2015, 05:07:10 AM looking for this file too
Title: Re: looking for 06A906032NL Post by: _nameless on November 10, 2015, 11:27:37 AM I have it patched I'll upload it when I get home
Title: Re: looking for 06A906032NL Post by: vwaudiguy on November 10, 2015, 11:45:26 PM When this happens (MPPS Clone) I just write the file I just read back. Hasn't failed me yet.
Title: Re: looking for 06A906032NL Post by: fknbrkn on June 24, 2016, 06:52:56 AM thats it
Title: Re: looking for 06A906032NL Post by: vwmaniac on April 11, 2017, 06:04:28 AM i had smase issue as op after mod of file there was checksum issue. mods and checksum completed thru winols. problem solved by using mpps to fix checksums after modding inn tunerpro. took an hour tom figure out the situation.
|