|
Title: Recommended USB VAG KKL Cables - Eurodyne flash cable Post by: guentherkapp on November 11, 2014, 08:26:56 AM I apologize for the re-posting, but I thought this question is more suitable for this section. ;)
Does anyone know of any technical or none-technical (maybe business) reasons why the Eurodyne flash cable would not work? ::) I tested it today and only got as far as getting the following messages in the Status Windows.
Please be so kind and note - I have installed the latest FTDI drivers and have no message or indication in the device manager that the FTDI device driver is not functional. Please let me know. Guenther Title: Re: Recommended USB VAG KKL Cables - Eurodyne flash cable Post by: custum on January 04, 2015, 05:21:18 AM I'm not sure about your cable but my vagcom installed without a hitch....as long as your operating system has installed the drivers properly. You may find you'll have to physically install them to through the control panel, some programs are like that. AND make sure that everything connected, ports etc are aligned, numbered and right. Hope it helps.
Title: Re: Recommended USB VAG KKL Cables - Eurodyne flash cable Post by: guentherkapp on January 17, 2015, 12:53:59 PM Thanks for the feedback. I solved the problem in the meantime, it was the wrong cable. The first one, which lead me to this post, did not have the correct chip set in it. I am also now believe that there might be a "software" block, meaning the EuroDyne cable only works with EuroDyne software, in place which prevents it from working with other tuning software applications.
|