|
Title: ESKONF Twice? Post by: Jerry Tunin on June 03, 2015, 10:08:14 PM I was looking through the following bin of mine at ESKONF and noticed it's in there twice... Which would I use?
0x10D34 -> 0x10D3A & 0x10D3B -> 0x10D41 Title: Re: ESKONF Twice? Post by: ddillenger on June 03, 2015, 10:55:07 PM The first one is for the default coding. Check VARDEF to confirm. When in doubt, change them both.
Title: Re: ESKONF Twice? Post by: tao13 on December 19, 2017, 08:53:54 AM Hi ALL
I have an 032Hn 1.8T ecu I used eskonf tools and i found 2 maps like next Only first looks like normal one Please tell me whitch one must change for remove SAI MANY MANY THANKS ## ESKONF_0 (Addr:00010C4D) -- AA FF 00 30 FF F8 30 b0:AA ZUE4(95)..:S(10) ZUE3(94)..:S(10) ZUE2(103).:S(10) ZUE1(102).: S(10) ZUE=Ignition coil b1:FF NC........:N(11) NC........:N(11) NC........:N(11) NC........: N(11) b2:00 EV4(89)...:Y(00) EV3(88)...:Y(00) EV2(97)...:Y(00) EV1(96)...: Y(00) EV=Fuel injector b3:30 LSHHK(63).:Y(00) EFLA(48)..:N(11) LDR(104)..:Y(00) TEV(64)...: Y(00) LSHHK=Rear O2, EFLA=Error lamp, LDR=N75, TEV=N80 purgevalve b4:FF BKV(22)...:N(11) NC(24)....:N(11) AAV(116)..:N(11) MIL(47)...: Y(00) BKV=Brakebooster pump, AAV=Shutoff valve, MIL=OBD lamp b5:F8 NC........:N(11) NC........:N(11) EKP(65)...:S(10) SLP(66)...: Y(00) EKP=Fuel pump, SLP=J299 SAI pump b6:30 ULT(105)..:Y(00) UAGR(114).:N(11) SLV(9)....:Y(00) NWS(115)..: Y(00) ULT=N249 wg valve, UAGR=EGR valve, SLV=N112 SAI relay, NWS=n205 VVT ## ESKONF_1 (Addr:00025E69) -- FF FF 00 F0 3F F0 2C b0:FF ZUE4(95)..:N(11) ZUE3(94)..:N(11) ZUE2(103).:N(11) ZUE1(102).: N(11) ZUE=Ignition coil b1:FF NC........:N(11) NC........:N(11) NC........:N(11) NC........: N(11) b2:00 EV4(89)...:Y(00) EV3(88)...:Y(00) EV2(97)...:Y(00) EV1(96)...: Y(00) EV=Fuel injector b3:F0 LSHHK(63).:N(11) EFLA(48)..:N(11) LDR(104)..:Y(00) TEV(64)...: Y(00) LSHHK=Rear O2, EFLA=Error lamp, LDR=N75, TEV=N80 purgevalve b4:3F BKV(22)...:Y(00) NC(24)....:N(11) AAV(116)..:N(11) MIL(47)...: Y(00) BKV=Brakebooster pump, AAV=Shutoff valve, MIL=OBD lamp b5:F0 NC........:N(11) NC........:N(11) EKP(65)...:Y(00) SLP(66)...: Y(00) EKP=Fuel pump, SLP=J299 SAI pump b6:2C ULT(105)..:Y(00) UAGR(114).:S(10) SLV(9)....:N(11) NWS(115)..: Y(00) ULT=N249 wg valve, UAGR=EGR valve, SLV=N112 SAI relay, NWS=n205 VVT Title: Re: ESKONF Twice? Post by: SB_GLI on December 19, 2017, 11:40:35 AM I used eskonf tools and i found 2 maps like next that tool doesn't really work. Title: Re: ESKONF Twice? Post by: BlackT on February 10, 2019, 08:20:47 AM I have same question,why two ESKONF
They same except 4. byte is different (https://i.postimg.cc/PrT196Tr/Capture.png) (https://postimg.cc/nMSsQGX6) If I want to do some modifications should I change only ESKONF? Title: Re: ESKONF Twice? Post by: aef on February 11, 2019, 02:26:06 AM the answer is in post nr2 and you can check and try to understand the difference in byte 4.
read about eskonf here https://s4wiki.com/wiki/Tuning#ESKONF Title: Re: ESKONF Twice? Post by: BlackT on February 11, 2019, 10:10:00 AM I read that few times but still i cant figure out why two ESKONF.
Maybe is problem with my english, but I have no clue what ddillenger mean it in nr2 post in this tread. :-\ I change both ESKONF and upload the flash, everything is working fine,but I don't like to do something that i don't understand. So I kindly ask you can you try to explain me little more better. Thank you in advance Edit: Hmm if I get it, first is for something like default settings of ECU. (Like the setting in mobile phone when we do hard reset) A second one is USER settings, soft coding,adaption etc. So changing both will be good decision :D Title: Re: ESKONF Twice? Post by: nyet on February 11, 2019, 10:13:24 AM Depending on ECU coding it might use different ESCONFS
ECU coding is stored in EEPROM (e.g. automatic vs manual) Title: Re: ESKONF Twice? Post by: BlackT on February 11, 2019, 10:23:56 AM I get it, thank you very much. Definitely best forum ever ;)
|