|
Title: Audi S4 2.7T ME7 8D0907551H Post by: ripzone on August 08, 2011, 11:52:01 PM Does anyone have h-box file or know if m-box is compatible
thx Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: nyet on August 09, 2011, 12:02:51 AM Yes. Just use an M-box + cluster recode
http://s4wiki.com/wiki/Generations Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: ripzone on August 09, 2011, 01:25:03 AM Thx but I already knew that the m-box and h-box are compatible with a cluster recode
basicly I have a stage 1 Neuspeed chipped H-box, and I want to code out secondary o2's since i'm changing down pipes. Also wanted to code out egt's since one of them bit the dust. So I got the bin file and dowloaded tunerpro and I'm waiting for the mtx checksum registration. Just wanted to know if M and H-box tunerpro xdf files are the same since I could only find the M-box file Thx again also thx for the fast reply Dan Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: nyet on August 09, 2011, 09:44:53 AM No, the map locations are completely different.
Sorry :( Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: ripzone on August 09, 2011, 01:06:24 PM Thx
tought so. So does anyone have the h-box defenition file :P Dan Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: nyet on August 09, 2011, 01:09:05 PM Shrug. Find the map locations yourself. It isn't hard.
Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: RaraK on August 15, 2011, 07:05:03 AM i posted one a while ago in here, try searching
Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: ripzone on August 15, 2011, 09:16:29 AM Thx Rarak,
I did find your file after searching a few days ago but its missing the parts on EGT. So I was trying to ad to it, but I have had no luck. Title: Re: request Audi S4 2.7T ME7 8D0907551H Post by: RaraK on August 29, 2011, 01:23:57 PM yea sorry im not going to revisit that, its soooo old i have no interest.
Just open a mbox file where you know locations, and do a search in hbox for a similar data structure H and M box are close enough it should be no issues to do it this way. Good luck |