NefMoto

can somebody help me correct my checksum
thanks

Please read the sticky before posting checksum requests.

http://nefariousmotorsports.com/forum/index.php?topic=3346.0title=

something like:

C:\Users\XXX\Desktop\me7sum-v1.0.3>ME7Check.exe
ME7Check v1.12 (c) mki, 06/2004-05/2012
Usage: ME7Check <bin-file>

C:\Users\XXX\Desktop\me7sum-v1.0.3>me7sum.exe
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].
Usage: me7sum.exe [-v] [-i <config.ini>] <inrom.bin> [outrom.bin]
       me7sum.exe [-v] [-i <config.ini>] -s <inrom.bin>

C:\Users\XXX\Desktop\me7sum-v1.0.3>me7sum.exe stanmodifie4.bin stanmodifie4
_chksOK.bin
ME7Tool (v1.0.3) [Management tool for Bosch ME7.x firmwares]
Inspiration from Andy Whittaker's tools and information.
Written by 360trev and nyet [BSD License Open Source].

Attempting to open firmware file 'stanmodifie4.bin'

Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/5/4019.00//24b/Dst02o/220900//'
 Part Number : '8L0906018Q  '
 Engine ID   : '1.8L R4/5VT     '
 SW Version  : '0002'
 HW Number   : '0261206790'
 SW Number   : '1037360287'

Step #2: Reading ROMSYS ..
 Startup section: word[0x008000]+word[0x00FFFE]
 @008038 Add=0x0081F7 CalcAdd=0x0081F7  ADD OK
 Program pages: 8k page first+last in 0x0000-0xFFFF and 0x20000-0xFFFFF
 @00803c Add=0xA0920E CalcAdd=0xA0920E  ADD OK
 All param page: word[0x010000]+word[0x01FFFE]
 @01bde6 Add=0x00971D CalcAdd=0x00971D  ADD OK

Step #3: Reading RSA signatures ..
 Searching for RSA offset #0...missing
 Searching for RSA offset #1...missing

Step #4: Finding CRC table(s) ..
 Searching for CRC table(s)...OK
 CRC table(s) OK

Step #5: Reading Main Data Checksums ..
 Searching for main data CRC pre block...OK
 Searching for main data CRC/csum blocks...OK
 Searching for main data CRC offsets...OK
 Searching for main data checksum offsets...missing
 Main CRCs:
 0) 0x0183C8-0x0183D1                      CalcCRC: F865666E
 1) 0x010002-0x013FFE @8d93a CRC: 7E3A488F CalcCRC: E640C112(r) ** FIXED **
 2) 0x014252-0x017F4E @8d940 CRC: 09D4030E CalcCRC: 99AF1C27(r) ** FIXED **
 3) 0x018192-0x01FBDC                      CalcCRC: 1159FD21(r)
 4) 0x026A00-0x02FFFC @8d946 CRC: E4648543 CalcCRC: FD6BD3E6(r) ** FIXED **

Step #6: Reading Main Program Checksums ..
 Searching for main program checksum..OK
 ROM Checksum Block Offset Table @1f702 [16 bytes]:
 1) 0x000000-0x00FBFF CalcChk: 48D03D91
    0x00FC00-0x01FFFF CalcChk: 21D0503B CalcCRC: F622C140 SKIPPED
 2) 0x020000-0x0FFFFF
    <fffe0>  Chk: 56503425 CalcChk: 5652254C ** FIXED **

Step #7: Reading Multipoint Checksum Blocks ..
 Searching for multipoint block descriptor #1...missing
 Searching for multipoint block descriptor #2...OK
 1) <1fbde>  0x000000-0x003FFF Chk: 0FA0F5CF Boot: (whitelisted) OK
 2) <1fbee>  0x004000-0x007FFF Chk: 0F4716B3 Boot: (whitelisted) OK
 3) <1fbfe>  0x000000-0x003FFF Chk: 0FA0F5CF CalcChk: 0FA0F5CF OK
 4) <1fc0e>  0x004000-0x007FFF Chk: 0F4716B3 CalcChk: 0F4716B3 OK
 Multipoint #2: [66 blocks x <16> = 1056 bytes]

*** Found 71 checksums in stanmodifie4.bin

Attempting to output corrected firmware file 'stanmodifie4_chksOK.bin'
├╛ Opening 'stanmodifie4_chksOK.bin' file for writing
├╛ Writing to file
├╛ Validating size correct 1048576=1048576
├╛ All OK, closing file

*** DONE! 9/9 error(s) in stanmodifie4.bin corrected in stanmodifie4_chksOK.bin!
 ***

Hmm, WinOLS reported 7 checksum errors, weird.

My file should be good, but why does ME7Sum report 9, and WinOLS only 7?

my ols says 7 as well. but if you correct the file with both ols and me7sum there are no differences between the 2 corrected files.

There are checksum results inside other areas that are also checksummed.

I checksummed your checksum so you can checksum your checksum?

Exactly ;)

this is what it kicked out for me!!!

there are newer versions of me7sum avail

    ooo didnt know thank you !!!!