NefMoto

Just read a 1K0907115AQ with 1K0907115AK loaded on it here is the EEPROM and the flash.

Would be rad if someone could help me immo off this.

Here you go mate, immo is off in eep, all checksums are corrected, no immo lights on dash etc.

 ::)

Thank you sir!

+1 for Buzzard

Hey man, which Software did you use for reading the ecu ?


Gesendet von iPhone mit Tapatalk

whats the password on the file?

Not sure what they used, But I have been using "ME7_95040" that I got here somewhere... You download it, unzip it, then copy and paste it into your "user" file on your drive.. Then open the command prompt and type  "me795040" hit enter, and a list of commands comes up...   After you have pulled the bin, I use  "eepromtool_04"  to make changes... Also somewhere here... Also a command prompt program...  Then ME7_95040 to falsh the modified file back...   The ME7_95040 only writes to the ecu in "boot mode", so it has to be out of the car and hooked to a bench flash harness... I don't know what to do if it is still in the car...