Pages: [1]
Author Topic: Hello from Indiana USA  (Read 3151 times)
4loops
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« on: March 08, 2016, 11:38:51 AM »

Hello all.  I am in the middle of a 4.2 ART swap into my 1999.5 B5 A4.  I've come here hoping to find an ART file converted to manual transmission so I won't have a high idle situation.  Hopefully this work is already there and a file available, if not, I'm definitely having to jump in the deep end!  So I'll have a lot to figure out.
Either way, I hope to contribute in some way to an already vast resource for VAG ECM tuning!

You'll see me in the noob forums and probably asking a lot of seemingly dumb questions. -But I'll get the hang of what's going on.  I'll search around before I start asking around though, I promise!
For now, I'll start researching how to make my bench flash setup and get all my software in order.  Then I'll start hunting the correct file(s) down to either flash or create a hybrid cal.

-I'll take all the advice, tips, and pointers I can get!

-See you around.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)