NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Write a wrong file on my ECU
Pages: [1]
« previous next »
Author Topic: Write a wrong file on my ECU  (Read 5429 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« on: May 14, 2016, 07:01:24 PM »
Hi People!

I write a wrong file on my M7.1. It occours others times, but i just shutoff the battery per 15 min and connect again to write the correct file.
But in this time, i can't write the correct file. What I cam make to correct it?

When my mouse have a low battery charge, it make some errors when i edit the file in winols, and was this error that change others file parts without i like.

wait for some help!!

Thanks!

Smiley
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #1 on: May 14, 2016, 07:38:19 PM »
Bootmode?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #2 on: May 15, 2016, 10:39:37 AM »
Quote from: vwaudiguy on May 14, 2016, 07:38:19 PM
Bootmode?

I try with bootmode using galleto, but the galleto show that "bootmode is not active"

I make the correct process, PIN 24 to mass, the ECU enter in bootmode, but galleto don't recognizes!

have other way?
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #3 on: May 15, 2016, 01:20:39 PM »
in galleto list, don't show me engine (2.8 30v)
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #4 on: May 15, 2016, 02:06:21 PM »
Quote from: Gulfstream on May 15, 2016, 01:20:39 PM
in galleto list, don't show me engine (2.8 30v)

Select your make, at the bottom of the list there should be 2 bootmode options.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #5 on: May 15, 2016, 03:17:04 PM »
Quote from: vwaudiguy on May 15, 2016, 02:06:21 PM
Select your make, at the bottom of the list there should be 2 bootmode options.

I make this!

But in "Volkswagen" menu, dont appears boot mode for Me7.1.1, just in "Audi" menu, its a problem?

And always show "Boot mode inactive"
« Last Edit: May 15, 2016, 03:22:20 PM by Gulfstream » Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #6 on: May 15, 2016, 03:46:03 PM »
i try the NefMoto Flasher to connect in boot mode, but don't connect, just show a messagen that don' possible inicite zero byte
Logged
Rl
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 31
« Reply #7 on: May 15, 2016, 05:34:04 PM »
Quote from: Gulfstream on May 15, 2016, 03:17:04 PM
I make this!

But in "Volkswagen" menu, dont appears boot mode for Me7.1.1, just in "Audi" menu, its a problem?

And always show "Boot mode inactive"

By the time you select your ecu "make" doesnt really matter. So select audi and try again.It should enter bootmode.
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232
« Reply #8 on: May 16, 2016, 11:22:32 AM »
Quote from: Rl on May 15, 2016, 05:34:04 PM
By the time you select your ecu "make" doesnt really matter. So select audi and try again.It should enter bootmode.

The problem was solved!

Desoldering EPROM and using a programmer.

Thanks for all!!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 08:51:14 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 18 queries. (Pretty URLs adds 0s, 0q)