Pages: 1 ... 8 9 [10]
Author Topic: Diesel ECU?  (Read 103174 times)
hans j
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #135 on: September 05, 2012, 07:31:06 AM »

I've been trying to communicate too. I'm using a bench flash harness with VCDS HEX-CAN and can pull the ECU part number up but all other operations fail. One thing I did notice is the chip inside is amd29f400bt and there isn't a memory layout for it yet.
Logged
Lord_Verminaard
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #136 on: November 21, 2013, 11:57:52 AM »

Bringing this one back up.  I have a 2005 Beetle TDI with BEW EDC16.  Just for kicks, I tried to connect with NefMoto.  It would connect but was unable to read ECU data.  If I can be of any help with testing, let me know.

Thanks!

Brendan
Logged
kaganader
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #137 on: December 02, 2013, 06:11:42 PM »

Bringing this one back up.  I have a 2005 Beetle TDI with BEW EDC16.  Just for kicks, I tried to connect with NefMoto.  It would connect but was unable to read ECU data.  If I can be of any help with testing, let me know.

Thanks!

Brendan

I just had the same problem with a 2000 1.9 TDI, ECU: R4 038906012BD 1,9l R4 EDC G500SG 2507
It will connect but cannot read ecu data... is there a solution to this as I've seen this thread started back in 2011.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #138 on: December 02, 2013, 06:57:42 PM »

yes. the solution is to buy a tool that reads them.
Logged
kaganader
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #139 on: December 02, 2013, 07:06:27 PM »

yes. the solution is to buy a tool that reads them.

Should I use Galletto v2 for the EDCxx ecus then? I've not played around with diesel ecus and I just tried one today, I did not know that Nefmoto could not read/write to the EDC ecus.
Logged
overlucked
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #140 on: June 04, 2016, 09:29:16 AM »

any updates?
Logged
Pages: 1 ... 8 9 [10]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)