Hello,

I' can't find LAMFA table in this ECU. At this moment car is running 14,7AFR (lambda closed loop control) below 4000rpm even though 1,2-1,3 bar of boost (that worries me, and limits torque at this rpm). At higher rpm it uses LAMBTS and AFR is good (11,5). I would like to make it runnig open loop at WOT at any RPM (or above 2500-3000rpm), I tried to do this cheating ECU with higher calculated EGT (KFTATM table), but it doesn't work.

It isn't any problem for me to pay for working solution.

It is Volvo S70 99' 2.3T 240HP (stock: 226HP/370Nm, mod: 313HP/450Nm - now car uses the same turbo with little bigger compression wheel, green T5R injectors, fmic and 3" downpipe).
Original and tuned files in attachment.

Regards.

There are another 2 maps at 19092 and 190E4 though that look more likely. They've been modified to 1 to force enrichment based on BTS.

1F6B6 8 bit 10x6 map is what i have for lamfa.

EDIT. your bin is different to mine.

edit2.. try 1E692 8 bit 10x6

Thanks a lot!
1E692 is working...  not exactly as I expected - eg. if I wrote there 0,78 (120 raw value) car was running about lambda 0,9. Anyway using lamfa and klfl I reached target