hi
Which one is the injector multiplier ?
Grundanpassungsfaktor 0 at 0x7507        or      Grundanpassungskonstante  at 0x7536         ?

and which one is the injector deadtime ?

I have a stock 1.8T@180hp with me3.8.2 with the values :
0x7507   =  128
0x7536   =  127
---------------------
So if I install Siemens 630cc,  what values shoud I make these approximately ?

Any help will be greatly appreciated.. I've been working on this for 1 week, and since I can't flash the ecu instantly without taking it out and putting it in, it takes LOTS of time..

Can you help please.. ?

Just thinking logically one is obviously a factor (multiplier) and the other is a constant (scaled by the factor maybe?).