Pages: [1]
Author Topic: ftdi echo failing, did not brick ecu, vagcom also wont connect  (Read 3853 times)
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« on: October 23, 2011, 03:26:46 PM »

after 9 months of successfully using nefmoto and vagcom, my car out of nowhere wont respond to either.  vagcom stalls and nefmoto - after trying - says ftdi echo test failed.

the last time i flashed, everything worked fine.  i've been driving the car for two weeks since that.  no problems at all to my knowledge.

this afternoon, i hardwired a v1 and jostled with the fuses.  is it possible i messed up one of the fuses?  everything seems to be operating fine in the car but just simply cant connect to any of the computers.  

this is actually a massive problem if i cant resolve it, because my cars tune is half finished... please help!
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #1 on: October 24, 2011, 12:30:15 AM »

we can delete this thread if this is pointless.

while hardwiring a valentine v1, i removed fuse 37:  'telefon and radio'

without this fuse installed, the car literally rejected all ECU scan requests.

isn't that strange?  anyways, the problem was solved when i got back into my car and realized i cant listen to music!

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)