Pages: [1]
Author Topic: Cleaning up AFR  (Read 2718 times)
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« on: July 19, 2016, 12:34:57 AM »

What are some ways you guys are cleaning up AFR during WOT .
I ve been going back and forth between Kflf fkkvs and fuel trims are within spec .

I attached a E85 and 93 Log just trying to clean it up.
Logged
SB_GLI
Hero Member
*****

Karma: +116/-10
Offline Offline

Posts: 1022


« Reply #1 on: July 19, 2016, 05:25:56 AM »

What are some ways you guys are cleaning up AFR during WOT .
I ve been going back and forth between Kflf fkkvs and fuel trims are within spec .

I attached a E85 and 93 Log just trying to clean it up.

Make sure your MAF calibration is spot-on.  For instance, I had a narrowband audi TT MAF in my car, thinking it was a wideband TT MAF.  These MAFs differ ever so slightly, the stock calibrations are pretty close.  I tuned for the wideband MAF, and while fueling was "close", it hunted like yours.  Once I figured out that I had a different MAF and updated my MAF scaling to match, it was dead nuts.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)