Pages: [1]
Author Topic: Bdm 100 Communication problem  (Read 4122 times)
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 57


« on: August 13, 2016, 02:52:01 PM »

Has anyone got this message on a Bdm 100 before trying a Med 9.1?

Tried to resolder all connection Contacts and a new USB cable same problem


Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: August 13, 2016, 02:56:24 PM »

shit clone.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #2 on: August 13, 2016, 05:11:10 PM »

shit clone.


Hey! I've seen 1 or 2 actually work. Quit being so hard on China.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
jastr
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 57


« Reply #3 on: August 14, 2016, 10:38:08 AM »

Shit clone from hardware or just bevause it doesn't work? Other prefer china over org so pretty hard to know if it's ok or not. A lot of users in here is running clone bdm
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #4 on: August 14, 2016, 11:08:21 AM »

Shit clone from hardware or just bevause it doesn't work? Other prefer china over org so pretty hard to know if it's ok or not. A lot of users in here is running clone bdm

shit clone because you dont know what the problem is. maybe they pinned it backwards? maybe its just broken? maybe you suck at soldering? maybe its pinned backwards and you cooked bdm port in mcu and now its correct but still doesnt work because of cooked port?
you have no idea.

now you're here, asking for support. because you have no where else to turn and expect everyone to just give you guesses.

where as if you had a real tool, there would be no guessing. you would contact the manufacture for support and they would help guide you through it until the problem was sorted.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)