NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > MK5 2.5 ECU immo defeat.
Pages: [1]
« previous next »
Author Topic: MK5 2.5 ECU immo defeat.  (Read 4280 times)
LVPainterZ
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« on: September 16, 2016, 02:54:43 PM »
Hey Guys,

Im using a 07K906032AQ ECU for a 2.5 swap into a MK1 Audi TT

I've pulled the bin file and modified the immo hex and now it states that the immo is basically the same as a new ECU in VCDS

The IMMO chip is 95160 and I had to use CS pin 6.3 to get it to pull the file in argdubs tool.

I have read a lot on this topic but i am still having issues with the checksums.

What does it take to properly check the checksums as Turboat"s tool will not do it as the bin file is 2kb

I will post the fees but i don't want it to be someone does it for me.

Anyone willing to help?
Logged
LVPainterZ
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #1 on: September 16, 2016, 02:57:57 PM »
Here are the files
Logged
dbreeze
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 41
« Reply #2 on: September 16, 2016, 08:29:56 PM »
Follow this and you should be all set.
Logged
LVPainterZ
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #3 on: September 17, 2016, 01:06:14 AM »
So either vag commander worked and modified it a couple times or I'm doing the checksums wrong.

how can i check the checksums as me7sum and me7check has an error with the file?

Vag com adaptation says 0 on the immo section not 1

Any ideas?
Logged
dbreeze
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 41
« Reply #4 on: September 17, 2016, 07:38:47 AM »
Quote from: LVPainterZ on September 17, 2016, 01:06:14 AM
So either vag commander worked and modified it a couple times or I'm doing the checksums wrong.

how can i check the checksums as me7sum and me7check has an error with the file?

Vag com adaptation says 0 on the immo section not 1

Any ideas?

me7sum and me7check are for Flash .bins only, not the Eeprom. The only checksums that would need to be fixed from a normal immo defeat would be the two pages at 0x010 and 0x020.

So change 0x012 and 0x022 (should originally be 01) to 02 and subtract 1 byte from the checksum (last two bytes of 0x010 and 0x020).
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 09:42:54 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 18 queries. (Pretty URLs adds 0s, 0q)