Puh okay... So i calmed down... thank you.
Yes, first line is very rich, it´s a test for the overrun feature.
I´ve read this in the "Overrun Flames, Gargle, Pop" Thread and because i´m a little kid with this i have to test if it works... It´s nice but too loud for daily use
But i have to test everything
I´ve to change the values in the first line to stock values.
I downloaded a 032BJ file... You say i´ve to compare this and my 032A file with same damos... I think it´s the same like you said i´ve to use the same XDF (i´m using Tunerpro for everything yet)...
I saw a lot of differences, so i hope that the definition is enough detailed to make necessary changes.
I´ll do the changes tomorrow and will upload the file... I´m very glad if you can take a look and tell me if i changed all necessary things.
One question:
Are you thinking it is possible to make the LAMFA Table like at attached pic? It should be run richer, so i can take care from high temps?! I don´t wrote this Map by myself, it´s from a user that means it should be better to drive a little bit richer.
Or doesn´t make it sense and i should use the stock BAM Map?
/edit: Missed the pic...
http://www.bilderload.com/bild/391056/lamfarichVXP10.jpg