NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > 4F1 907 559 A Simos 6.2 Immobilizer Defeat?
Pages: [1]
« previous next »
Author Topic: 4F1 907 559 A Simos 6.2 Immobilizer Defeat?  (Read 6993 times)
dbreeze
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 41
« on: June 07, 2016, 07:38:28 PM »
I've tried searching but can't find any info on whether an immobilizer defeat exists for VAG Simos 6.22. Anyone have any info to point me in the right direction? ECU Eeprom is attached

Thanks!
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #1 on: June 07, 2016, 08:11:39 PM »
no off, only clone.
Logged
dbreeze
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 41
« Reply #2 on: June 07, 2016, 08:21:38 PM »
Quote from: k0mpresd on June 07, 2016, 08:11:39 PM
no off, only clone.
Thanks!
Logged
dbreeze
Jr. Member
**

Karma: +9/-0
Offline Offline

Posts: 41
« Reply #3 on: June 08, 2016, 08:27:34 AM »
@k0mpressed: Would I be able to just swap the eeprom chips between the original ECU and a replacement one or should I do a full BDM read from the original and write it to the replacement?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #4 on: June 08, 2016, 10:14:29 AM »
i always do a full bdm clone.
Logged
1HGUY
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
« Reply #5 on: June 14, 2016, 09:18:57 PM »
Quote from: k0mpresd on June 08, 2016, 10:14:29 AM
i always do a full bdm clone.
I did today 2 SIMOS 6.22 ECUs by BDM-100 The trouble was that EEPROM chip M95320W was not reading correctly, even though no indication of trouble and/or errors. I had manually dumped both chips for comparison purposes. Secondly, BDM-100 does not recognize this ECU and you're limited by only FULL read/write. Any comments, suggestions, remedies will be much appreciated.
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #6 on: June 15, 2016, 06:18:39 AM »
this BDM-100 I presume isn't the official EVC version?
Logged
I have no logs because I have a boost gauge (makes things easier)
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #7 on: June 15, 2016, 07:55:13 AM »
i have had no issues with even clone bdm100 on these ecus.
Logged
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60
« Reply #8 on: February 08, 2017, 12:18:24 PM »
Quote from: k0mpresd on June 15, 2016, 07:55:13 AM
i have had no issues with even clone bdm100 on these ecus.
Are you using bdm100 clone through cracked winols? or another software? I can't find 6.22 compatibility.

Thanks.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 05:28:12 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)