Pages: [1]
Author Topic: KRKTE,KVB or XDF 8E0909518AF 0261207939 1037366446  (Read 9063 times)
infantry_13
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6



« on: September 27, 2016, 10:52:05 AM »

Friends! Help!
need XDF for the engine.
need to change KRKTE - KVB - TEMIN
installed nozzles from BEX 0280156061
Help the XDF file

Here is my firmware, EURO 2, no EVAP, chip 1.1 bar
everything works perfectly. Can someone come in handy.

https://yadi.sk/d/vAcreB98vorgG
« Last Edit: October 03, 2016, 07:36:32 AM by infantry_13 » Logged
infantry_13
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6



« Reply #1 on: September 28, 2016, 06:08:08 AM »

Friends! Help!
need XDF for the engine.
need to change KRKTE - KVB - TEMIN
installed nozzles from BEX 0280156061
Help the XDF file

Here is my firmware, EURO 2, no EVAP, chip 1.1 bar
everything works perfectly. Can someone come in handy.

https://yadi.sk/d/vAcreB98vorgG

Look, I corrected KVB was the value 469,22 now 304,69 correctly I changed.
And I want to correct KRKTE
but there is no right XDF

here is my file, checked the check sum of the program IRONFeliks was 1 error
8E0909518AF 0002 A4 1.8t AMB 0261207939 1037366446 KVB - OK!
https://yadi.sk/d/yfr8U_F2vqqQr
Logged
spen
Full Member
***

Karma: +43/-0
Offline Offline

Posts: 112


« Reply #2 on: September 30, 2016, 02:44:51 AM »

TEMIN, word @ 0x815c66 (file offset 0x15c66)
TEMINVA, word @0x815c68 (file offset 0x15c68)

there is a one in a hundred chance I transposed those variables.  I only disassembled a few lines of code from your file.

KRKTE, word @ 0x81e40e (file offset 0x1e40e)
Logged
infantry_13
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6



« Reply #3 on: September 30, 2016, 12:57:44 PM »

View this KRKTE, KVB
BEX

TEMIN, word @ 0x815c66 (file offset 0x15c66)
TEMINVA, word @0x815c68 (file offset 0x15c68)
KRKTE, word @ 0x81e40e (file offset 0x1e40e)

Is this correct?
« Last Edit: October 03, 2016, 07:33:07 AM by infantry_13 » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)