Pages: [1]
Author Topic: "Soft" launch control for me383  (Read 7115 times)
Dropout
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 53


« on: January 08, 2017, 12:54:13 AM »

Has anyone done "soft" launch control (when the car is stopped, clutch and accelerator pressed to keep the revs at a set rpm, say 3500) for the me383, is it possible ? Could one of the 30 rpm limiter be used for this ?
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #1 on: January 17, 2017, 05:20:59 AM »

It would be nice to try..
Logged

E85oholic
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #2 on: January 17, 2017, 06:05:11 AM »

Has anyone done "soft" launch control (when the car is stopped, clutch and accelerator pressed to keep the revs at a set rpm, say 3500) for the me383, is it possible ? Could one of the 30 rpm limiter be used for this ?

I have seen some people do it with a soft LC using a WOT Box but one thing is a soft LC and another is a hard LC that generates boost too.
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 395



« Reply #3 on: January 17, 2017, 11:49:17 AM »

Did a soft one on a later ME7 Tip the other day, would have thought me3 not too dissimilar? Think these are a pain to define/get info for though aren't they? What's different in them compared to the later ones, should be able to work it out if you have a decent def file?

Should be one in the new def threads?

https://www.youtube.com/watch?v=WQSKUm73f7s
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #4 on: January 18, 2017, 04:17:22 AM »

What maps were involved.. anything you can show us?

I have a very well defined file for m3.8.3  But problem is that i have no car to test it on yet.. maybe in spring time.
Logged

E85oholic
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #5 on: January 18, 2017, 09:48:18 AM »

i have a hard limiter patch for these.
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 395



« Reply #6 on: January 18, 2017, 02:30:29 PM »

What maps were involved.. anything you can show us?

I have a very well defined file for m3.8.3  But problem is that i have no car to test it on yet.. maybe in spring time.

M3 or ME3? Both would probably be done in the same/similar way - they all have temp sensors and rpm maps, just different map names and layouts if anything. Shouldn't be too hard if you have it defined.

Launch control on that one was just as per the wiki or threads;
https://s4wiki.com/wiki/Tuning#Launch_control

http://nefariousmotorsports.com/forum/index.php?topic=151.0title=
Logged
Dropout
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 53


« Reply #7 on: January 20, 2017, 08:07:15 AM »

Did a soft one on a later ME7 Tip the other day, would have thought me3 not too dissimilar? Think these are a pain to define/get info for though aren't they? What's different in them compared to the later ones, should be able to work it out if you have a decent def file?

Should be one in the new def threads?

https://www.youtube.com/watch?v=WQSKUm73f7s

There is a very good def. file for the me3.8.3 on this site, but they are quit different to the ME7.

i have a hard limiter patch for these.

For the me3.8.3 ? Care to share ?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #8 on: January 20, 2017, 09:07:10 AM »

There is a very good def. file for the me3.8.3 on this site, but they are quit different to the ME7.

For the me3.8.3 ? Care to share ?

share? i dont even know you. you could have at least gotten me drunk first and then tried to take advantage of me.  Kiss
Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #9 on: January 20, 2017, 10:39:24 AM »

I think that maybe some useful variables and maps for that are inside SA_WE: A174. 50  Schubabschalten/Wiedereinsetzen. For example TLSN, TTMOT & DTSA.
Logged
Dropout
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 53


« Reply #10 on: January 20, 2017, 02:14:13 PM »

share? i dont even know you. you could have at least gotten me drunk first and then tried to take advantage of me.  Kiss

Sorry, I don't drink , was just asking
Logged
Dropout
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 53


« Reply #11 on: January 20, 2017, 02:16:42 PM »

I think that maybe some useful variables and maps for that are inside SA_WE: A174. 50  Schubabschalten/Wiedereinsetzen. For example TLSN, TTMOT & DTSA.

Thanks, I'll have a look at them, was just interested if it could be done like with the me7 (I have a wot box :-D )
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)