Immo off S4 ME7.1

Pages: [1]

« previous next »

Author

Topic: Immo off S4 ME7.1 (Read 5198 times)

sonflasch

Full Member

Karma: +12/-2
Offline

Offline

Posts: 68

	Immo off S4 ME7.1 « on: March 06, 2017, 08:28:35 AM »

hello mates

plz Immo off 8D0907551D

Thanks


« Last Edit: March 07, 2017, 04:54:29 AM by sonflasch »	Logged

IamwhoIam

Hero Member

Karma: +52/-115
Offline

Offline

Posts: 1070

	Re: Immo off S4 MED7.1 « Reply #1 on: March 07, 2017, 03:42:58 AM »

It might actually *help* if you knew what type the ECU actually is... same as people talking about ME3.8 and so on. as for your immo off, there's plenty of how to's on here, so if you can't do a simple search and apply some very simple steps, maybe you should quit this "industry" and do something else?


	Logged

I have no logs because I have a boost gauge (makes things easier)

sonflasch

Full Member

Karma: +12/-2
Offline

Offline

Posts: 68

	Re: Immo off S4 MED7.1 « Reply #2 on: March 07, 2017, 04:37:45 AM »

Is a mistake
Should be called ME 7.1 (Motronic)

What should attack the same ??


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: Immo off S4 ME7.1 « Reply #3 on: March 07, 2017, 04:37:02 PM »

What have you already tried?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

sonflasch

Full Member

Karma: +12/-2
Offline

Offline

Posts: 68

	Re: Immo off S4 ME7.1 « Reply #4 on: March 07, 2017, 06:17:30 PM »

I've changed that as above. Unfortunately no connection with the control unit. The ecu has worked before. Then it was sent. Unfortunately when it was back still immo on.
I opened the ecu and see wild soldering at eeprom
Now I've found the pad of mass around 94050 is broken.
Clear is now another problem.
Just wanted to make sure whether immo off file is ok.

Thanks....


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: Immo off S4 ME7.1 « Reply #5 on: March 07, 2017, 06:19:48 PM »

What have you tried when making your own immo off file?


	Logged

sonflasch

Full Member

Karma: +12/-2
Offline

Offline

Posts: 68

	Re: Immo off S4 ME7.1 « Reply #6 on: March 07, 2017, 08:40:05 PM »

I have read the eeprom ...
As described above in the jpg.
Written without problems.
But now I have no signal from the ecu.
Ecu made and seen that was soldered there.
It with the solder gun cleanly removed and determined massepad defective.
Must now clean again solder and somehow make contact.
So I wanted to check out if my change is ok


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

December 02, 2024, 01:22:09 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search