Pages: [1]
Author Topic: Does open loop and closed loop use different maps?  (Read 736 times)
chito
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25


« on: December 17, 2023, 08:21:43 PM »

My car 4B0906018CA ME7.5.5 is tuned to have 1 bar boost.
The highest load is tuned to 170. When car is cold everything works fine, KFMIRL KFMIOP KFZWOP works all as stated. But once the car is fully warmed up( after minutes of driving, the cat is warmed, coolant is 90 degree.), it seems like the car uses stock KFMIOP then. The highest load will be around 145. And the stock KFMIOP highest load is 145.
I tried to remove the MAF sensor, then the car runs all good, doesn’t matter how long I drive, the highest load is always 170.
Could someone tell?
Logged

Audi A6 C5 1.8T
fknbrkn
Hero Member
*****

Karma: +185/-23
Offline Offline

Posts: 1454


mk4 1.8T AUM


« Reply #1 on: December 18, 2023, 01:33:19 AM »

HBN probably
Proper logging is the answer
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)