Pages: [1]
Author Topic: LDOB Overboost function  (Read 2885 times)
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« on: September 03, 2017, 10:50:30 AM »

Hey

just another noob question:

a APP 1.8T 20V engine will give 235Nm of torque when full throttle an everything is fine.

Do I have this 235Nm only when overboost function is active and it stays for about 10 secounds (based on TLDOBAN-map), or will overboost give a additional torque to the 235Nm ?

Delta rl will be up to 14,25 % of filling should give about 25Nm of torque..

Or is overboost function not active at 1.8T APP? I didn´t find state mashine switch yet..

Does anyone knows ?
If it is in-active, did some activate the LDOB ?

BR
Logged
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #1 on: September 09, 2017, 06:43:51 AM »

*bump*

noone ever worked with this function ?

I´ll think you heavily reatch GWPLDOB set value of 600%/sec, so overboost will not be triggered. But maybe some re-active and work with the function ?

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)