Pages: [1]
Author Topic: 03G906016DT sw 370570 mappack needed  (Read 5238 times)
Rackis18
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 27


« on: December 26, 2018, 10:03:32 AM »

hi. anyone can give me mappack for this file becouse I cant understand these ecu map its dsg and these maps are different to manual gearbox. thank you
Logged
Kacza
Full Member
***

Karma: +20/-7
Offline Offline

Posts: 216


« Reply #1 on: December 27, 2018, 12:22:50 AM »

What's different? Because I don't understand ....
DW start - D1A30
TQ - DDD62
....
e.t.c
Logged
Rackis18
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 27


« Reply #2 on: December 27, 2018, 11:15:25 AM »

Well yes I don't understand everything but please don't blame me I'm not a pro still learning...
They are very similar to manual just different offset i found all some maps can you show me svbl? And inverse DW? Thanks
Logged
andux2
Newbie
*

Karma: +3/-1
Offline Offline

Posts: 5


« Reply #3 on: January 13, 2019, 10:56:03 AM »

map pack (1017 maps) in xdf and kp formats:

VehicleType            = Passenger car
VehicleProducer      = Audi
VehicleSeries          = A3
VehicleBuild           = 8P
VehicleModel          = 2.0 TDI PD
VehicleModelyear     = 2005
EcuUse                   = Engine
EcuProducer            = Bosch
EcuBuild                  = EDC16U1
EcuProdNr               = 03G906016DT
EcuStgNr                 = 0281011892
EcuSoftwareVersion  = 370570
EcuSoftwareVersionVersion = 5878
OutputPS                 = 140.0
OutputKW                = 103.0
Logged
Rackis18
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 27


« Reply #4 on: February 07, 2019, 03:34:16 PM »

Thank you very much mate very helpful.
Logged
yop03
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #5 on: January 03, 2022, 02:19:17 AM »

thanks Smiley
here is an ori file for this car from mpps
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)