Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
1.8T connecting rod failure.
Pages:
1
2
[
3
]
« previous
next »
Author
Topic: 1.8T connecting rod failure. (Read 20339 times)
vwaudiguy
Hero Member
Karma: +53/-37
Offline
Posts: 2024
Re: 1.8T connecting rod failure.
« Reply #30 on: December 08, 2017, 10:17:17 AM »
Quote from: lphsail21 on December 08, 2017, 12:19:47 AM
After loading the car on the dyno and putting down 344awtq and 309awhp on the quattro/tiptronic
What dyno was this on? I can't see those numbers on 1.) AWD power 2.) tiptronic. 3.) That turbo
Maybe E85?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Carsinc
Sr. Member
Karma: +17/-2
Offline
Posts: 447
Re: 1.8T connecting rod failure.
« Reply #31 on: December 08, 2017, 03:50:52 PM »
f21? 1.8t? 380lbs crank atleast? i need your info you can just do all my tunes\
Logged
slappynuts
Jr. Member
Karma: +0/-0
Offline
Posts: 49
Re: 1.8T connecting rod failure.
« Reply #32 on: December 21, 2017, 03:17:44 PM »
These rods fail from rings butting and grabbing the wall, this adds just enough more pressure at high EGTs to fold the rods right up. The rings were gapped this way to meet emissions. The evoX 4b11 has the same issue, and ironically they have the same Mahle pistons and the same ring gap factor. If you keep EGTs down you can go much farther. If you do decide to do drop in rods, use the Mahle specs instead of the foolish VW/Audi ones. Page 21.....
http://www.mahle-aftermarket.com/media/local-media-north-america/pdfs-&-thumbnails/catalogs-and-literature/pistons-and-rings/pr-40-16.pdf
Logged
slappynuts
Jr. Member
Karma: +0/-0
Offline
Posts: 49
Re: 1.8T connecting rod failure.
« Reply #33 on: December 21, 2017, 03:18:17 PM »
These rods fail from rings butting and grabbing the wall, this adds just enough more pressure at high EGTs to fold the rods right up. The rings were gapped this way to meet emissions. The evoX 4b11 has the same issue, and ironically they have the same Mahle pistons and the same ring gap factor. If you keep EGTs down you can go much farther. If you do decide to do drop in rods, use the Mahle specs instead of the foolish VW/Audi ones. Page 21.....
http://www.mahle-aftermarket.com/media/local-media-north-america/pdfs-&-thumbnails/catalogs-and-literature/pistons-and-rings/pr-40-16.pdf
Logged
Pages:
1
2
[
3
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 30, 2024, 12:49:43 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
