Hello

edit: i have both pins now -- really compicatet with bootmode and ME7EEPROM nefmoto ....
but now next problems --- i want to swap kessy with both pins ---- i have testet both kessy with pin and all ok but if i want to put in old pin at second step
http://wiki.ross-tech.com/wiki/index.php...ng_(Kessy)
kessy say wrong pin but i have test bevor at security and all is ok

next step with old kessy -- i want to adapt second ecu --- i have both pins and adaption seems ok --- all number from vin and immo are shown in new ecu ---- but dont starts ------ no faults -----
all numbers from both ecu are all the same -- software only is different ( old-P9202 // new-P9203 and from Sportec )

Is this a problem with steering column ? ( software P100 )

i cant adapt new kessy and no new ecu ..... please help

I have a big problem with Porsche Cayenne 955 - 2003 to read anything
I must have skc for changing kessy and dme
For My old kessy I have pin - vag commander
But for the second i can't read it - I Test me7eeprom 1.31 and 1.40 with the blue kkl
I have Bosch 0261 207 696 - 022 906 032 BT
I think me7.1.1 and 95p08 --- i can't it read
I get every time no response from ecu // 0x01 or 0x07 and sometime 0x50101
Please help how to do bevore I have to solder out ---
With vcds I can check the dme and it's complete ok
Thanks a lot

Did you manage to work this out?
I might need to do the same son on a 2004 Touareg to play with ecu/kessy swap.
By the way, the blue cable is not good if it is not based on a FT232RL chip.