ME 7.5 wideband lambda correction in wot

Pages: [1]

« previous next »

Author

Topic: ME 7.5 wideband lambda correction in wot (Read 3662 times)

mbkr89

Full Member

Karma: +2/-4
Offline

Offline

Posts: 96

	ME 7.5 wideband lambda correction in wot « on: March 25, 2018, 03:25:02 AM »

Hello,
on my BAM engine lambda correction stop if current afr is 0.75.
How can i fix the problem to run correction at lower lambda about 0.72 for example.


	Logged

spacey3

Full Member

Karma: +12/-1
Offline

Offline

Posts: 198

	Re: ME 7.5 wideband lambda correction in wot « Reply #1 on: March 26, 2018, 03:10:39 AM »

.75 is around minimum reading of the sensor (hence it flat lines) - LALIUS. (can probably be changed, no idea if it's accurate below .75 or anything though).

LALIUSMN is the minimum lambda the trims are active, you can lower that a bit.


	Logged

prj

Hero Member

Karma: +1058/-464
Offline

Offline

Posts: 5955

	Re: ME 7.5 wideband lambda correction in wot « Reply #2 on: March 26, 2018, 03:23:50 AM »

I think correct way is to fix the tune.

The car wouldn't even drive without lambda control.


	Logged

PM's will not be answered, so don't even try.
Log your car properly.

sonique

Sr. Member

Karma: +24/-12
Offline

Offline

Posts: 283

	Re: ME 7.5 wideband lambda correction in wot « Reply #3 on: March 26, 2018, 06:31:32 AM »

Bam engine 0,75 lambda EGT protection
this lambda very rich fix the program


« Last Edit: March 26, 2018, 06:33:32 AM by sonique »	Logged

mbkr89

Full Member

Karma: +2/-4
Offline

Offline

Posts: 96

	Re: ME 7.5 wideband lambda correction in wot « Reply #4 on: March 28, 2018, 03:59:52 AM »

Thank you


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

September 25, 2024, 01:26:49 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search