Galetto unable to write

Pages: [1]

« previous next »

Author

Topic: Galetto unable to write (Read 2789 times)

sakta

Newbie

Karma: +0/-1
Offline

Offline

Posts: 6

	Galetto unable to write « on: March 17, 2018, 10:37:08 AM »

Hi guys,

So I was reading the topic on NLS and Anti lag, and decided to try my hand at it, using both setzi's code and Mazer. I had ignition issues with the engine stalling so decided to return to my inital ECU file, which I backed up, but...

Whenever I try to write to my ECU, I cannot, because my Galletto gives me an error 'Change Speed'. I removed fuse 11 and tried again and no dice. My OBD port seems to still function fine for diagnostics (no errors found). I tried checking values like the battery voltage and it displays over OBD, so surely my ECU is fine and not bricked?

Any suggestions to what I can try? I think I went a little over the top this time....


	Logged

sakta

Newbie

Karma: +0/-1
Offline

Offline

Posts: 6

	Re: Galetto unable to write « Reply #1 on: March 17, 2018, 11:06:18 AM »

Would I be correct in assuming that its bricked, and I need to open it up, ground the correct pins and enter boot mode, then use Chiploader or something similar? Or would my case not be so bad?

The car starts, and has a rough idle, revs randomly drop very low, then come back up again.

When ignition is on, the fuel pump activates every few seconds tooo.... really unsure what has happened, possibly corrupt flashing?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: Galetto unable to write « Reply #2 on: March 17, 2018, 07:25:13 PM »

only hardware damage will prevent galetto from flashing.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

sakta

Newbie

Karma: +0/-1
Offline

Offline

Posts: 6

	Re: Galetto unable to write « Reply #3 on: March 18, 2018, 02:41:31 AM »

Quote from: nyet on March 17, 2018, 07:25:13 PM

only hardware damage will prevent galetto from flashing.

Thank you, I guess thats a relief. The only question is what is preventing it, the Galettos lack of documentation is kinda making things difficult. It flashed and read the first time flawlessly, not a single error code!

I think I will try boot mode when the snow clears. Maybe I corrupted


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 10:26:18 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search