Pages: [1]
Author Topic: audi 2004 immob problem RB4 cluster  (Read 3417 times)
99flake
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: March 22, 2018, 02:53:19 AM »

hi all
i have a audi 2004 1.8t which seems to have immob problems RB4 dash
i have purchased vag tacho and also DL vcds lite and cannot connect with either
car currently displays safe on cluster and will only run for 1-2 seconds
any info on solving this would by gratefully accepted
thanks in advance
Logged
Oski
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #1 on: March 22, 2018, 06:41:59 AM »

Read cluster with vageepromprogrammer in decrypted mode and pair it with ecu along with the keys. You can use just a dumb kkl cable.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #2 on: March 22, 2018, 10:08:39 AM »

Best off reading eeprom from ecu. Crypto cluster risk brick
Logged

Giving your mom a tuneup
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)