Pages: [1]
Author Topic: Bricked after putting lc & nls, writed succesfully, hopes for checking my file  (Read 3670 times)
ziebowski
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3



Readed normally the ecu with nefmoto, run the autoscript for the .bin to put the lc & nls, then corrected the checksums, writed succesfully to my ecu, now the car won't start. If there is anyone who can check the file, maybe tell me what I need to correct. Please guys i believe in you
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW

The autoscript should not be used by anyone who doesn't know ASM

It can result in very bad files.

The results need to be checked by hand.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ziebowski
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3



So know i have non accesible ecu from the nefmoto boot mode with 24 pin  Sad
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035



Well you learned the hard way that flashing random code changes without boot mode backup is a really bad idea.
Flash it to stock in boot. Nefmoto flasher doesn't support it.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
ziebowski
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3



Thanks for fast answer, can you prefer a program to flash it? I have red that I need Galletto, but there is no way I can have it right now, can I use normal ebay KKL cable?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)