Pages: [1]
Author Topic: LWFW questions  (Read 2212 times)
giles92
Full Member
***

Karma: +13/-3
Offline Offline

Posts: 83


« on: June 05, 2018, 12:07:10 PM »

hey guys i just got my 2.7 back together and ive got a ttv flywheel (13 lbs) and an fx400 clutch. Do you guys make a habit of adjusting idle RPM or idle tq reserve when adding a lwfw? I see more info about 1.8's and im unsure if the v6 needs assistance.
What do you do as the norm?
thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #1 on: June 05, 2018, 03:22:30 PM »

Sometimes. Also depends on your NVH tolerance.

All single mass FW setups (lw or otherwise) may cause idle instability on stock tune.

So short answer is yes, on the 2.7t some idle tuning might be necessary, including even possibly raising idle rpm, depending on your fw setup.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)