Pages: [1]
Author Topic: Golf VR6 MK3 Tuning  (Read 5391 times)
J.Laborde
Full Member
***

Karma: +57/-29
Offline Offline

Posts: 82


Tuner and Software Developer


WWW
« on: September 02, 2018, 03:05:54 AM »

Hello All,

I have some brains to pick for a tune I am developing for a Golf VR6 MK3. I have downloaded the EPROM binary using an (E)EPROM USB Programmer and have imported it into WinOLS. From there I have compared it to an M3.81 VR6 MK4 file and assigned the maps as best I am able to. Has anyone made any further progress on these?
Details:

Vehicle: Vw Golf 3
Engine: 12v VR6
HW #: 0 261 203 052
SW #: 021 906 258 AT
EPROM: Intel L27C512E/231081

Here all a few pictures and also the stock, stage 1, and WinOLS project including map pack I have made SO FAR for this ECU binary. I am looking for some more maps including those for maximum engine speed.

Kind Regards,

J.Laborde
« Last Edit: September 03, 2018, 12:24:07 AM by J.Laborde » Logged

I am here to learn and help others learn. Smiley

He's a maniac.......MAAAAAANIIIAC
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #1 on: September 02, 2018, 03:47:43 AM »

Some development on tunerpro website under definition files / original files
Logged

Giving your mom a tuneup
J.Laborde
Full Member
***

Karma: +57/-29
Offline Offline

Posts: 82


Tuner and Software Developer


WWW
« Reply #2 on: September 02, 2018, 03:56:25 AM »

Some development on tunerpro website under definition files / original files

Legend +1 applaud  Cheesy

Thanks Marty.
Logged

I am here to learn and help others learn. Smiley

He's a maniac.......MAAAAAANIIIAC
J.Laborde
Full Member
***

Karma: +57/-29
Offline Offline

Posts: 82


Tuner and Software Developer


WWW
« Reply #3 on: September 02, 2018, 03:57:45 AM »

For completeness, here are those files:
Logged

I am here to learn and help others learn. Smiley

He's a maniac.......MAAAAAANIIIAC
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 395



« Reply #4 on: September 02, 2018, 09:10:25 AM »

If it helps...

http://nefariousmotorsports.com/forum/index.php?topic=7683.msg70721#msg70721

http://nefariousmotorsports.com/forum/index.php?topic=7904.0title=

Didn't look into it much being older M stuff, but should probably help a few!
Logged
J.Laborde
Full Member
***

Karma: +57/-29
Offline Offline

Posts: 82


Tuner and Software Developer


WWW
« Reply #5 on: September 02, 2018, 09:12:45 AM »


Thanks very much mate. I'll take a look tomorrow. Its 12AM here at the moment :O
Logged

I am here to learn and help others learn. Smiley

He's a maniac.......MAAAAAANIIIAC
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 395



« Reply #6 on: September 02, 2018, 09:16:05 AM »

Thanks very much mate. I'll take a look tomorrow. Its 12AM here at the moment :O

Actually I just noticed that it's 24v, used to 022906032 here in the UK for those, I've put a fair bit up for them if you search through my posts but you'll find a lot of info for the 24v if you search through them....5:15pm here though  Wink
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #7 on: September 02, 2018, 08:36:17 PM »

I'm lost we have no 24v vr6 before 7.1.1 here...
Logged
J.Laborde
Full Member
***

Karma: +57/-29
Offline Offline

Posts: 82


Tuner and Software Developer


WWW
« Reply #8 on: September 02, 2018, 08:44:08 PM »

Apologies, 12v.
Logged

I am here to learn and help others learn. Smiley

He's a maniac.......MAAAAAANIIIAC
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #9 on: September 03, 2018, 12:23:10 AM »

Apologies, 12v.

Might be good to edit the first post.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)