help with offsets

Pages: [1]

« previous next »

Author

Topic: help with offsets (Read 3541 times)

luketomo

Newbie

Karma: +0/-1
Offline

Offline

Posts: 12

	help with offsets « on: December 01, 2018, 03:03:16 PM »

evening all

im looking for a bit of help and guidance with using damos on a me 7.5 i think its correct one for the ecu do i need to put any offset or factors in?

i have tried adding in LC from s4 wiki guide not sure if i have done this right? i also used the map loacation pack on S4 Wiki ?

cheers luke


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: help with offsets « Reply #1 on: December 02, 2018, 07:27:11 AM »

I am pretty sure you will need to write your own LC code, as copy paste from s4 wiki wont work for your own ECU.


	Logged

luketomo

Newbie

Karma: +0/-1
Offline

Offline

Posts: 12

	Re: help with offsets « Reply #2 on: December 03, 2018, 11:46:56 AM »

Hi thank you for your reply

i didnt think it was right thats why i wanted someone to check the file and the damos for me and tell me where im going wrong as i dont think im scaling the damos to the file right as the figures dont look correct, im new to this so on a big learning curve


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: help with offsets « Reply #3 on: December 03, 2018, 12:56:19 PM »

There is no point to doing any "scaling" until you write ASM.

Period.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

luketomo

Newbie

Karma: +0/-1
Offline

Offline

Posts: 12

	Re: help with offsets « Reply #4 on: December 03, 2018, 01:15:04 PM »

sorry for sounding Dumb but what is ASM? like i said im new to this and first map iv looked at so needing a litle help and guidance


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: help with offsets « Reply #5 on: December 03, 2018, 01:37:32 PM »

Actual code. You're not going to get anywhere with this, pick something much more basic to start.


	Logged

luketomo

Newbie

Karma: +0/-1
Offline

Offline

Posts: 12

	Re: help with offsets « Reply #6 on: December 03, 2018, 02:20:40 PM »

hi where do you recommend i start with or what to start with?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: help with offsets « Reply #7 on: December 03, 2018, 02:33:57 PM »

stage 1 boost increase on a car with one or more turbos.


	Logged

luketomo

Newbie

Karma: +0/-1
Offline

Offline

Posts: 12

	Re: help with offsets « Reply #8 on: December 03, 2018, 03:10:53 PM »

does that look like the right damos file? also it says its offset at 800000 does that seem about right?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 29, 2024, 11:15:27 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search