Pages: [1]
Author Topic: Kessy problem  (Read 3353 times)
ullisees
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: May 21, 2018, 10:10:45 AM »

My kessy has decided that it no long wants to work with the car. I got the immo id out of the engine ecu and the looked in the kessy and it just has a row off XXXXXXXXXXXXX

When i read the eeprom with carprog it shows no keys vin or immo id in the kessy. When i look at the hex code i can see immo id in 1 place.

If i change everywhere that should have vin and immo id then carprog reads them and all looks good. Put the kessy back in the car and vin and immo id revert back to XXXXXXXXXXXXXX. Is there something im doing wrong
Logged
Sven77
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 20


« Reply #1 on: December 17, 2018, 03:08:50 PM »

ive got same problem as you here, did you manage to fix tthid? any info will be much appreciated.

Thanx in advance.
Logged
H2Deetoo
Sr. Member
****

Karma: +26/-1
Offline Offline

Posts: 257


« Reply #2 on: December 18, 2018, 02:07:52 AM »

To both of you, please specify the exact cluster partnumber and software version.
Logged
Sven77
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 20


« Reply #3 on: December 30, 2018, 01:48:35 PM »

cluster pn:0263655110 V:40S S:7413000455 Bosch RB8.

the kessy module pn: 3D0909135S SIEMENS VDO
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)