NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Is there a way to flash 5G0906259F Software onto 5G0906259E ECU Simos18.1?
Pages: [1]
« previous next »
Author Topic: Is there a way to flash 5G0906259F Software onto 5G0906259E ECU Simos18.1?  (Read 2388 times)
NBR
Full Member
***

Karma: +20/-7
Offline Offline

Posts: 79
Hi guys

Stupid Question, but I want to know if it's possible to flash SC800O3 sw version from a 5G0906259F ECU onto a 5G0906259E via bench flash? Or will the ECU need to be replaced (if there are no differences in the physical ECU). 
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
if they are the same HW number you can use frf to update to the desired software.
Logged
NBR
Full Member
***

Karma: +20/-7
Offline Offline

Posts: 79
The part number differs at the end "E" vs "F" . Frf update only lists software versions from the "E" ecu because that's what's on the car
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
Quote from: NBR on April 30, 2019, 09:32:35 AM
The part number differs at the end "E" vs "F" . Frf update only lists software versions from the "E" ecu because that's what's on the car

i will repeat again: if the HW (HARDWARE) numbers are the same, the ecu can be updated to the desired software via frf.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • June 24, 2024, 10:40:31 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.042 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)