Pages: [1]
Author Topic: DQ500 TC1766 Measuring values  (Read 804 times)
zeal0t
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 14


« on: February 27, 2024, 05:45:10 PM »

Hello guys, I'm going to change some measuring values address,
but I can't find any reasonable table for that and i've been stuck here for a few days, can anyone give some hints? Wink
Logged
crackerx
Jr. Member
**

Karma: +1/-10
Offline Offline

Posts: 43


« Reply #1 on: February 28, 2024, 01:20:11 AM »

Why you need that?
Logged
zeal0t
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 14


« Reply #2 on: February 28, 2024, 02:37:57 AM »

I made a dq500 conversion for my MK6 GTI, but i find that the measured value "the display gear in instrument" is wrong, when it's 1st gear, this measurd value is 2, the 7th gear is "kein_gang".
so i want to anilysis the issue.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)