NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > B6 a4 2.7 swap with immobilizer???
Pages: [1]
« previous next »
Author Topic: B6 a4 2.7 swap with immobilizer???  (Read 4083 times)
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209
« on: November 24, 2018, 09:20:37 AM »
Hey guys I am in the process of swapping a 2.7STK engine into my b6 a4.Is it possible to swap over the immo chip from the stock me7.5 ecu into a s4 ecu??Have it matched???So have a working immobilizer???
Logged
seanf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19
« Reply #1 on: December 28, 2018, 04:36:46 PM »
Just did this today using 4b0907551t ecu it learned my vin no problem, car in question was 04 3.0 A4, I promptly flashed an mbox file on it just wanted to see if I could do it.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #2 on: December 28, 2018, 07:49:45 PM »
No, ME7.5 and ME7.1.x have totally different immo.

If you are using ME7.1.x just start from scratch, you don't need to copy your existing immo. Just add the vin and do the checksum.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
seanf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19
« Reply #3 on: December 29, 2018, 06:13:56 AM »
Quote from: nyet on December 28, 2018, 07:49:45 PM
No, ME7.5 and ME7.1.x have totally different immo.

If you are using ME7.1.x just start from scratch, you don't need to copy your existing immo. Just add the vin and do the checksum.

should have stated that better, I just read the pins of each ecu and adapted with VCDS. OP would have to use A6 bin for an active immo tho. But it is totally possible to have a working immo on a 2.7t swap.
« Last Edit: December 29, 2018, 06:16:24 AM by seanf » Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
« Reply #4 on: February 16, 2019, 12:43:43 AM »
Quote from: seanf on December 29, 2018, 06:13:56 AM
should have stated that better, I just read the pins of each ecu and adapted with VCDS. OP would have to use A6 bin for an active immo tho. But it is totally possible to have a working immo on a 2.7t swap.
yes possible
but we don't know if he wants* the immo  or if he needs it for inspection purposes etc.
Logged
seanf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19
« Reply #5 on: February 16, 2019, 07:56:03 AM »
Quote from: dirtnasty on February 16, 2019, 12:43:43 AM
yes possible
but we don't know if he wants* the immo  or if he needs it for inspection purposes etc.
With how easy it is to adapt an ecu and the theft protection factor I don't see any point in defeating it unless you have a tune that reverts to stock when a new vin is learned.

As soon as I find a definition file for an A6 6mt bin I'm gonna change over the changes on my mbox so I can have an ecu with immo so some thief doesn't start my car with a screw driver and drive off.

Sent from my LM-G710 using Tapatalk
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 01:00:04 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)