Closed loop lambdacontrol go static at high rpm WOT

Pages: [1]

« previous next »

Author

Topic: Closed loop lambdacontrol go static at high rpm WOT (Read 3529 times)

curamrdan

Full Member

Karma: +4/-1
Offline

Offline

Posts: 128

	Closed loop lambdacontrol go static at high rpm WOT « on: February 19, 2019, 11:55:35 AM »

Hello, what causing this. Lambda control goes static(not off) at certain RPM point(6000rpm) at wot. Enclosing two developing logs, one si low boost(0.8bar+creep) and second is high boost (1.7bar). Car is bigturbo 1.8t with mafless hack. Or is it due actual lambda is close enought target?


	Logged

woj

Hero Member

Karma: +43/-3
Offline

Offline

Posts: 500

	Re: Closed loop lambdacontrol go static at high rpm WOT « Reply #1 on: February 19, 2019, 02:11:25 PM »

So how would you say lambda control "going off" should manifest itself in your logs?


	Logged

curamrdan

Full Member

Karma: +4/-1
Offline

Offline

Posts: 128

	Re: Closed loop lambdacontrol go static at high rpm WOT « Reply #2 on: February 19, 2019, 04:24:37 PM »

Quote from: woj on February 19, 2019, 02:11:25 PM

So how would you say lambda control "going off" should manifest itself in your logs?

You can see, lambdacontrol trace freezes since 6000rpm. In first example it freze at 0, in second freezes at +8%.

I dont know if its just loose of precision in logging or some issue, factory settings.


« Last Edit: February 19, 2019, 04:26:24 PM by curamrdan »	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Closed loop lambdacontrol go static at high rpm WOT « Reply #3 on: February 19, 2019, 11:07:51 PM »

Who did your mafless hack? How was it done? Is it possible that problems are causing lambda control to turn off?

Without know specifically how the mafless hack was implemented, it will be impossible to debug any fueling problems you see.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

spacey3

Full Member

Karma: +12/-1
Offline

Offline

Posts: 198

	Re: Closed loop lambdacontrol go static at high rpm WOT « Reply #4 on: February 20, 2019, 02:18:20 AM »

What lambda are you requesting? Can't quite see from screenshots... Post your logs and file (if not commercial).


	Logged

prj

Hero Member

Karma: +1072/-481
Offline

Offline

Posts: 6037

	Re: Closed loop lambdacontrol go static at high rpm WOT « Reply #5 on: February 20, 2019, 03:21:10 AM »

Lambda control gets frozen when BTS is active to prevent engine meltdown by faulty sensor.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

curamrdan

Full Member

Karma: +4/-1
Offline

Offline

Posts: 128

	Re: Closed loop lambdacontrol go static at high rpm WOT « Reply #6 on: February 20, 2019, 03:30:30 AM »

Ah, yes, i just check when spacey3 ask about AFR request. Confirming, that it happends on BTS activation. Thank you guys.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Closed loop lambdacontrol go static at high rpm WOT « Reply #7 on: February 20, 2019, 08:58:19 AM »

Quote from: prj on February 20, 2019, 03:21:10 AM

Lambda control gets frozen when BTS is active to prevent engine meltdown by faulty sensor.

Thanks.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 04:23:59 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search