NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > ECU Definition request, please
Pages: [1]
« previous next »
Author Topic: ECU Definition request, please  (Read 4500 times)
lkomnino
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 51
« on: March 20, 2019, 05:05:18 AM »
Noob here, following guides, have got full read of my ECU A6 C5 AJK with Tip FAW (5A)
Have also downloaded the stock AJK bin from here, and TunerPro, which is why i'm here:

Could someone send me a def file?

Doesn't specify what other infor to add but ECU: 4B0907551G
Bin attached. I suspect it is tweeked, but hope not.
Me7Checked.

Thanks
Logged
lkomnino
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 51
« Reply #1 on: March 20, 2019, 11:15:34 AM »
Just used HxD to compare to a stock file and they are identical.
This confuses me as my car is now running teribbly and I had thought I must have changed some setting by accident.
Got a xtool vag401, and after testing solenoids (actuator test evap etc including injectors and cam adjusters) it sounds awful.

Popped off cam covers and all seems okay, but need to get VCDs to check MVB 90 in engine electrics.

Told it could be flooding and the waste spark causing issues, but suspect stuck VVT adjusters.

please advise if you have experienced this before.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #2 on: March 20, 2019, 01:59:57 PM »
pointless to guess w/o posting DTCs and logs.

Also, there are many other well defined 551 files that are cross flashable with your ecu.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
lkomnino
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 51
« Reply #3 on: March 21, 2019, 01:58:55 AM »
No engine DTCs. And new to logging, shall read guides....
Thanks

Sent from my G3121 using Tapatalk

--edit--
Ok, in Nefmoto program, have read that some people choose to monitor variables which are not helpful in diagnosing. On KWP2000 logging tab can't see any options for me to fiddle with, (probably a good thing considering my present situation!!).
--edit--
need definition file for logging... took me a while to figure that one out..
I have A6 C5 2.7T with 4B0907551G, can I use these defs: http://files.s4wiki.com/defs/ just the 8D0907551G. got *.csv & *.xdf

Can't find guide for logging. logging needs definitions *.xml or *.ecu & read variables *.xml
--edit--
http://nefariousmotorsports.com/forum/index.php/topic,837.0.html
https://www.youtube.com/watch?v=olAYz0JCHgA
« Last Edit: March 21, 2019, 03:53:46 AM by lkomnino » Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: March 21, 2019, 09:41:45 AM »
1) next time you post, obey forum rules
http://nefariousmotorsports.com/forum/index.php?topic=5549.0
Moved post out of request section.

2) don't use nef for logging, it is for flashing
https://s4wiki.com/wiki/Tuning#Logging_utilities

3) There are plenty of logging guides
In fact, the above references this
http://nefariousmotorsports.com/forum/index.php?topic=4830.0title=
4) you can't use that xdf with your binary, you'll have to cross flash the matching binary

If you cross flash, you can also use M-box which is well defined and documented on how to tune, but you will lose IMMO if your car has it now.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
lkomnino
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 51
« Reply #5 on: March 22, 2019, 01:45:45 AM »
Quote from: nyet on March 21, 2019, 09:41:45 AM
1) next time you post, obey forum rules
http://nefariousmotorsports.com/forum/index.php?topic=5549.0
Moved post out of request section.

2) don't use nef for logging, it is for flashing
https://s4wiki.com/wiki/Tuning#Logging_utilities

3) There are plenty of logging guides
In fact, the above references this
http://nefariousmotorsports.com/forum/index.php?topic=4830.0title=
4) you can't use that xdf with your binary, you'll have to cross flash the matching binary

If you cross flash, you can also use M-box which is well defined and documented on how to tune, but you will lose IMMO if your car has it now.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sorry, in state of panic as car running perfectly a few days ago, after cam belt failure re-build, and now like bricks in a cement mixer. Huh

--edit--
There was a reason my nickname was 'Double Lucky Leo'...
Turns out the 'actuator test' must have found a sticky cam adjuster or two, causing the timing chain to skip....... causing the timing to be out.....then the beautiful marriage between valves and pistons.... YEAY!!
On the plus side, this was what I was repairing it from anyway. Bought for £200 with cam belt failure. Lets hope, as it was just a cranking whack, that i don't need to pul the engine again.
Live and learn, check movement of cam adjusters and don't test them if it's running well.

Cylinder 4 & a not so super, bosch super 4...
« Last Edit: March 23, 2019, 05:57:56 AM by lkomnino » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 05:57:52 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 18 queries. (Pretty URLs adds 0s, 0q)