NefMoto > Technical > Tuning > ESKONF runner flap delete (KFSU)
Pages: [1]
« previous next »
Author Topic: ESKONF runner flap delete (KFSU)  (Read 3366 times)
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269
« on: July 10, 2019, 05:55:06 PM »
Can someone assist with the location in ESKONF where I would delete the runner flap solenoid?

Also, what would the codeword be?

ME7.1 2.8 30v ecu by the way.
Logged
2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #1 on: July 10, 2019, 06:39:55 PM »
Quote from: amd is the best on July 10, 2019, 05:55:06 PM
Can someone assist with the location in ESKONF where I would delete the runner flap solenoid?

Also, what would the codeword be?

ME7.1 2.8 30v ecu by the way.

Its the N75 driver, to my surprise aswell. IN theory you could also it use as a control valve on FI conversion.
Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269
« Reply #2 on: July 11, 2019, 09:01:12 AM »
That's what I thought and I derped a bit. Turns out my binary has four ESKONF's and I wasn't changing the correct one. I changed them all to what I needed and it's good to go now!

Thank you!

Anyone know why there are more then one ESKONF sections on some binaries?
Logged
2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: July 11, 2019, 09:04:17 AM »
Quote from: amd is the best on July 11, 2019, 09:01:12 AM
That's what I thought and I derped a bit. Turns out my binary has four ESKONF's and I wasn't changing the correct one. I changed them all to what I needed and it's good to go now!

Thank you!

Anyone know why there are more then one ESKONF sections on some binaries?

diff ESKONF for diff ECU coding, same with all maps that have variants
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #4 on: July 11, 2019, 09:04:29 AM »
Quote from: amd is the best on July 11, 2019, 09:01:12 AM
That's what I thought and I derped a bit. Turns out my binary has four ESKONF's and I wasn't changing the correct one. I changed them all to what I needed and it's good to go now!

Thank you!

Anyone know why there are more then one ESKONF sections on some binaries?

haha, nice , its probably the same story as with 0_1_a etc maps. They might be setup for the same car but in different versions. FWD,Quattro, Manual and auto. Could be wrong though.
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #5 on: July 11, 2019, 09:49:25 AM »
Quote from: amd is the best on July 10, 2019, 05:55:06 PM
Can someone assist with the location in ESKONF where I would delete the runner flap solenoid?
ME7.1 2.8 30v ecu by the way.

Try to change in ESKONF.5 byte two low significant bits to 11
xxxxxx11
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 01:00:32 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0s, 0q)