NefMoto > Vehicles > Vehicle Tech > Questions about 0B5/DL501 S-tronic gearbox.
Pages: [1]
« previous next »
Author Topic: Questions about 0B5/DL501 S-tronic gearbox.  (Read 4480 times)
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168
« on: May 09, 2019, 08:20:42 AM »
Hi!

I hope someone has some info about what I am looking for.

I wonder if it is possible to retrofit the longitudinal 0B5/DL501 S-tronic gearbox, in say an Audi B5 chassi and with an 1.8t/2.7t engine. Which components do you also need besides the gearbox and TCU?

Steering wheel and shift paddles?
The main shifter?

Does the S-tronic gearbox share the same bolt pattern as the manual 01A/01E/02X/03A gearboxes?

What about the S-tronic half shafts, might they fit the B5 hubs?

When it comes to the TCU and wiring, I can imagine it is gonna be A LOT of work to get everything to work as it should.

The TCU needs specific canbus messages from the ECU?


From Sweden
Logged
Audi A4 Avant 1.8t Quattro -2001 (AWT)
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #1 on: May 09, 2019, 08:49:16 AM »
Quote from: Terror_Flynn on May 09, 2019, 08:20:42 AM
Does the S-tronic gearbox share the same bolt pattern as the manual 01A/01E/02X/03A gearboxes?

What about the S-tronic half shafts, might they fit the B5 hubs?


I'd suggest you first download an SSP about DL501 and look at how it's actually installed in a B8 chassis car before asking all these questions.
Logged
I have no logs because I have a boost gauge (makes things easier)
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 06:41:45 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)