Pages: [1]
Author Topic: Immo code  (Read 5218 times)
Tobbe1338
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: August 29, 2019, 03:43:39 AM »

Hey, i got my vag k commander 1.4 and trying to get hold of my immo code, but don’t get it to work. Anyone that can guide me trough it? The goal is to program my key to the immo. The car is a Audi A4 b6 2004 with me7!


Skickat från min iPhone med Tapatalk
Logged
_nameless
Hero Member
*****

Karma: +374/-3447
Offline Offline

Posts: 3018



« Reply #1 on: August 29, 2019, 06:48:12 AM »

pull the ecu and read the eeprom
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
Tobbe1338
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #2 on: August 29, 2019, 08:06:05 AM »

I did, but how do i find the pin?


Skickat från min iPhone med Tapatalk
Logged
_nameless
Hero Member
*****

Karma: +374/-3447
Offline Offline

Posts: 3018



« Reply #3 on: August 29, 2019, 04:46:33 PM »

I did, but how do i find the pin?


Skickat från min iPhone med Tapatalk
post it
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 3.282 seconds with 15 queries. (Pretty URLs adds 0.159s, 0q)