Hi,

I've got my bdm 100 set up on win 10 (64), xp (32)

on both setups I hear a relay click when I plug in the usb cable and when I click the "ON" button in either cmd or dimsport

additionally, I've checked the cable & connections to ecu (all connections are connected)

I've powered ecu and bdm, but still no luck

are there any other tricks to getting this to read/write?

my errors are as follows:

CMD ® Technologies srl - MPCProg
Ver. 3.1.0.1255    Dongle ID: 192    Date: 9/10/2019 12:53:13 PM
Firmware Revision V.01   SN: 0258
ECU Communication Error
+12Vcc power error or Communication error

and from dimsport:
Firmware Revision: V.01    SN: 0258
. . . . . . . . . .
Interface communication error (E13)

MPC version error (E06): 0x00000000
Part number error (E05): 0x00000000
Power error or communication error (E14)



Thanks in advance!